[ Contents | Search |Next | Previous | Up ]
From: Tazz
Date: 23 Feb 2004
Time: 18:08:58
Remote Name: 67.27.182.36
This is the Dragon Goblet by Lakeland Molds. I have let the mold dry completely before repouring, but I had not yet heard of "talcing" it? Will give this a try. Will also try to dampen it. It seems that the wing tips want to come off, or the wings want to seperate from each other also, AND was trying to break in the stem area. I also have the unicorn goblet that just wants to break in half. Almost like the casted slip just does not want to release from either side of the mold. Very frustrating, especially since I have never encountered this problem. Thanks!! Tazz