[ Contents | Search |Next | Previous | Up ]
From: Terry
Date: 25 Feb 2004
Time: 22:14:28
Remote Name: 68.58.49.125
I need a little help on what kiln to consider getting. Here's what I will be doing: firing decals(Harbon, of course) on ceramic tiles up to 6x6, more than one at a time if possible(tile murals).
Also, will be firing ceramic mugs and shot glasses, hand-painted plates up to 11" in size, small hand-painted ceramics like vases and the like.
Here's the trick - I do not have the capability to install a 240v circuit. Currently, I have a 100 amp breaker box that already has 2 240v circuits(stove, dryer).
So, I need a 120-volt unit that will fire the items above at the proper cone temperatures.
Can anyone guide me on what kilns(if any) to consider?
Thanks!