Harbon Q & A

[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]

Re: lots of help needed

From: Char@Char'sCeramics.Pa
Date: 11 Aug 2006
Time: 16:44:41
Remote Name:


Collette, yes you can fire a decal on the china plate. For china: fire the decal to cone 017, you should not hurt the gold pattern. If you have a plate rack for firing, fire the plate standing on its rim. If not stilt, unless you have a rough edge on the back.(Dry footed-no glaze)then you do not need a stilt. Start firing with your switches on low and leave them there for an hour, then every 1/2 to 1 hour, turn up the kiln, vent until you cannot smell any of the decal, close lid when odor is gone. (If you do not have a kiln vent system). Char

Last changed: December 07, 2009