Harbon Q & A

[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]


decal firing

From: Glennys
Date: 25 Aug 2006
Time: 00:20:54
Remote Name: 207.69.137.9

Comments

you also have to charge for the decal. if the mug seam is small you may be able to clean it in a short time but if it is heavy it will take a while once you have scraped it then use a damp paper towel and smooth the seam area out so there is no lines. now you can fire it to bisque that may take 12 hrs,frist firing is to 03,then you will glaze it inside and out side then fire it again for 12hrsat 06, put decal in bowl of water for 1min when paper comes of you put on to mug be sure you put it where you want it then wipe it from the inside out get all bubbles out from under the decal or it will be no good do not put any thing over the decal no paint or glaze on top of decal then fire at 018 forabout 12hrs.when you glaze you put each mug on a stilt&dont let them touch any thing or they will fire together.


Last changed: December 07, 2009